Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am familiar with the Process to Recover / Reset the Console password on my ASA5508x HA pair of firewalls.They are running in an Active/Active Failover configuration. Can I perform the reset procedure on the standby, reload and come back online wit...
We have a dozen Anyconnect Profiles on an ASA5525x v.9.13(1)12.Until recently we only used the ASA's DHCP server to generate the IP address to the Client based on the Tunnel-Group.We currently have a need to use DHCP from our Windows 2012 R2 DHCP Ser...
We need a script OnConnect for a VPN based on group membership. The script will run when the connection is made and it will map 2 Network (Windows Shares) drives for the GM's MAC Laptop. I have never built a script for a windows client let alone a ma...
We are running a pair of WS-2960XR- 48fpd-I Switches in a Stack Configuration. Our Syslog Server Is reporting a Non-responsive FRU Power Supply. I think this is a known bug, but our IOS version is 15.2(4)E7 and is booting the C2960X-UNIVERSALK9-M so...
Greetings,
I am struggling to configure aaa authentication on my cisco switches. Currently all of my devices are using a Corporate based Cisco ISE server to do TACACS+. We are being spun out as a standalone company and I have to bring up our own ...
Thank You! I am using ISE 2.7 as my RADIUS Server. We just got it, so I am trying to learn as I go. WE have a Standalone ISE with only the base license. Thank you for the fast reply.
Sorry, the line:Is the normal behavior of do I have something reconfigured?Should have been:Is this behavior normal or do I have something mis-configured?
Hi Jouni,Thanks for the reply. So, I am setting up the route tracking on my "Outside" interface, I have another interface, "Hotwire" with a higher Metric, that I want to failover to when the ping fails. Should the "Hotwire" interface be the Target ...
