06-16-2017 01:45 AM
Hi,
I have a Cisco RV325 router but want to access the cli instead of the web interface.
All the SSH / remote SSH are enabled and i can use putty to make a connection but when entering the username/password it always gives me access denied.
I also tried accessing the router on the internal lan ip, and also via the wan ip, both give me the same result.
Anybody here know how to solve this issue because i would really like to configure the router via cli instead of the web interface.
Is there anything i am missing or did not do yet to get this to work.
Thanks a lot,
Jimmy
06-16-2017 04:20 AM
Hello,
this could be a permissions issue. Make sure that the user you are logging in with has SSH access rights enabled, as described in the document below:
Group Management on RV320 and RV325 VPN Router Series
https://sbkb.cisco.com/CiscoSB/GetArticle.aspx?docid=7e0b6f9ba20c489cb2c4487783dcdefb_Group_Management_on_RV320_Router.xml&pid=2&converted=0
08-29-2017 04:01 PM
Did this and still have the same problem.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide