Dear All,
please i need help with my problem.
when i trying to access anyconnect vpn we page , it does not display (https:// 31.x.x.x)
this is my configuration :
ip local pool vpn_pool 192.168.68.129-192.168.68.254 mask 255.255.255.128
object network AnyConnect-pool
subnet 192.168.68.0 255.255.255.0
nat (outside,outside) dynamic interface
object-group network all
network-object 10.250.1.0 255.255.255.0
network-object 10.251.1.0 255.255.255.0
network-object 10.251.0.0 255.255.255.0
network-object 192.168.50.0 255.255.255.0
nat (inside,outside) source static all all destination static AnyConnect-pool AnyConnect-pool
nat (outside,inside) source static AnyConnect-pool AnyConnect-pool destination static all all
webvpn
enable outside
anyconnect image disk0:/anyconnect-win-3.1.01065-k9.pkg 1
anyconnect enable
tunnel-group-list enable
group-policy vpn-policy internal
group-policy vpn-policy attributes
wins-server none
dns-server value 8.8.8.8 62.68.42.2
vpn-tunnel-protocol ssl-client ssl-clientless
password-storage enable
split-tunnel-policy tunnelall
split-tunnel-network-list value vpn-access
default-domain value bcd.ly
nem enable
nac-settings none
address-pools value vpn_pool
webvpn
anyconnect keep-installer installed
anyconnect dtls compression none
anyconnect ask enable default anyconnect timeout 30
tunnel-group vpn-users type remote-access
tunnel-group vpn-users general-attributes
address-pool vpn_pool
default-group-policy vpn-policy
tunnel-group vpn-users webvpn-attributes
group-alias BOCD-VPN enable
please any urgent help.
Regards
Ali