cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
470
Views
0
Helpful
1
Replies
Beginner

Problem with a s2s IP SEC between ASA and Adtran

I'm having a problem getting this tunnel to come up.  What info would you guys need to help me out? I'm just cutting my teeth on networking i've always had guys to defer these problems to but I dont right now....

This is what keeps popping up in the logs

6Dec 08 201212:19:13713172



Group = x.x.x.x, IP = x.x.x.x, Automatic NAT Detection Status:     Remote end is NOT behind a NAT device     This   end is NOT behind a NAT device

  and

6Dec 08 201212:19:13302015OutsideIP500x.x.x.x500Built outbound UDP connection 1088 for outside:x.x.x.x/500 (x.x.x.x/500) to identity:OutsideIP/500 (OutsideIP/500)

and

4Dec 08 201212:19:33713903



Group = x.x.x.x, IP = x.x.x.x Information Exchange processing failed

there's a couple more logs, let me know if ya'll need anything else to help.

Everyone's tags (6)
1 REPLY 1
Highlighted
Cisco Employee

Problem with a s2s IP SEC between ASA and Adtran

a copy of the configuration of the ASA would help and also advise which vpn tunnel is to the adtran device.

also, if you can run the following debug:

debug cry isa

debug cry ipsec

and share the output when you try to ping between the 2 LANs.