cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1040
Views
0
Helpful
1
Replies

problem with cisco client 4.0.3(A) - xauth

p.dubicki
Level 1
Level 1

hi

I'm trying to connect w2k (cisco vpn client 4.0.3) with cisco vpn concentrator

but xauth doesnt work !!! my logs are:

Cisco Systems VPN Client Version 4.0.3 (A)

Copyright (C) 1998-2003 Cisco Systems, Inc. All Rights Reserved.

Client Type(s): Windows, WinNT

Running on: 5.0.2195

225 10:46:34.578 04/19/04 Sev=Info/4 CM/0x63100002

Begin connection process

226 10:46:34.578 04/19/04 Sev=Info/4 CM/0x63100004

Establish secure connection using Ethernet

227 10:46:34.578 04/19/04 Sev=Info/4 CM/0x63100024

Attempt connection with server "xx.xx.xx.xx"

228 10:46:34.578 04/19/04 Sev=Info/6 IKE/0x6300003B

Attempting to establish a connection with xx.xx.xx.xx.

229 10:46:34.593 04/19/04 Sev=Info/4 IKE/0x63000013

SENDING >>> ISAKMP OAK AG (SA, KE, NON, ID, VID(Xauth), VID(dpd), VID(Unity)) to xx.xx.xx.xx

230 10:46:34.703 04/19/04 Sev=Info/4 IPSEC/0x63700008

IPSec driver successfully started

231 10:46:34.703 04/19/04 Sev=Info/4 IPSEC/0x63700014

Deleted all keys

232 10:46:34.921 04/19/04 Sev=Info/5 IKE/0x6300002F

Received ISAKMP packet: peer = xx.xx.xx.xx

233 10:46:34.921 04/19/04 Sev=Info/4 IKE/0x63000014

RECEIVING <<< ISAKMP OAK AG (SA, KE, NON, ID, HASH, VID(Unity), VID(Xauth), VID(dpd), VID(Frag), VID(?), VID(?)) from xx.xx.xx.xx

234 10:46:34.921 04/19/04 Sev=Info/5 IKE/0x63000001

Peer is a Cisco-Unity compliant peer

235 10:46:34.921 04/19/04 Sev=Info/5 IKE/0x63000001

Peer supports XAUTH

236 10:46:34.921 04/19/04 Sev=Info/5 IKE/0x63000001

Peer supports DPD

237 10:46:34.921 04/19/04 Sev=Info/5 IKE/0x63000001

Peer supports DWR Code and DWR Text

238 10:46:34.937 04/19/04 Sev=Info/6 IKE/0x63000001

IOS Vendor ID Contruction successful

239 10:46:34.937 04/19/04 Sev=Info/4 IKE/0x63000013

SENDING >>> ISAKMP OAK AG *(HASH, NOTIFY:STATUS_INITIAL_CONTACT, VID(?), VID(Unity)) to xx.xx.xx.xx

240 10:46:34.937 04/19/04 Sev=Info/4 IKE/0x63000082

IKE Port in use - Local Port = 0x01F4, Remote Port = 0x01F4

241 10:46:34.937 04/19/04 Sev=Info/4 CM/0x6310000E

Established Phase 1 SA. 1 Crypto Active IKE SA, 0 User Authenticated IKE SA in the system

242 10:46:34.953 04/19/04 Sev=Info/5 IKE/0x6300002F

Received ISAKMP packet: peer = 213.218.113.139

243 10:46:34.953 04/19/04 Sev=Info/4 IKE/0x63000014

RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from xx.xx.xx.xx

244 10:46:34.953 04/19/04 Sev=Info/4 CM/0x63100015

Launch xAuth application

245 10:46:35.000 04/19/04 Sev=Warning/3 CM/0xA3100012

Unable to forward xAuth request data to xAuth application. Error code 4294967283

246 10:46:35.000 04/19/04 Sev=Warning/2 IKE/0xE3000099

Failed to process Xauth Request (NavigatorTM:412)

247 10:46:35.000 04/19/04 Sev=Info/4 IKE/0x63000017

Marking IKE SA for deletion (I_Cookie=6CC5B5C8B1A7D0EA R_Cookie=758B3064945FDC63) reason = DEL_REASON_CANNOT_AUTH

248 10:46:35.000 04/19/04 Sev=Info/4 IKE/0x63000013

SENDING >>> ISAKMP OAK INFO *(HASH, DWR) to xx.xx.xx.xx

249 10:46:35.687 04/19/04 Sev=Info/4 IKE/0x6300004A

Discarding IKE SA negotiation (I_Cookie=6CC5B5C8B1A7D0EA R_Cookie=758B3064945FDC63) reason = DEL_REASON_CANNOT_AUTH

250 10:46:35.687 04/19/04 Sev=Info/4 CM/0x63100014

Unable to establish Phase 1 SA with server "xx.xx.xx.xx" because of "DEL_REASON_CANNOT_AUTH"

251 10:46:35.687 04/19/04 Sev=Info/5 CM/0x63100025

Initializing CVPNDrv

252 10:46:35.687 04/19/04 Sev=Info/4 IKE/0x63000001

IKE received signal to terminate VPN connection

253 10:46:36.187 04/19/04 Sev=Info/4 IPSEC/0x63700014

Deleted all keys

254 10:46:36.187 04/19/04 Sev=Info/4 IPSEC/0x63700014

Deleted all keys

255 10:46:36.187 04/19/04 Sev=Info/4 IPSEC/0x63700014

Deleted all keys

256 10:46:36.187 04/19/04 Sev=Info/4 IPSEC/0x6370000A

IPSec driver successfully stopped

1 Reply 1

p.dubicki
Level 1
Level 1

additional info:

when I'm trying to connect by command line interface od cvpn client by command:

vpnclient connect cliauth 'connection-name'

all works vell ...

that means GUI xauth doesn't work...

any idea why ?