12-18-2012 07:24 AM - edited 02-21-2020 06:34 PM
Hi Everyone,
Need to confirm if QOS can be used on IPSEC Site to site VPN?
Also IPSEC VPN can it participate in Routing Protocols.
Example
Site A source Address 192.168.10.1
Site B Source Address 192.168.10.2
Now For Site A to reach Site B IPSEC one way is that we can use the static IP of our ISP like
Site A
192.168.10.2 255.255.255.0 10.x.x.x ISP address
Using Routing Protocols
IS it possible to use OSPF between two sites and advertise the routes in OSPF?
Will they see each other as ospf neis?
Thanks
MAhesh
Solved! Go to Solution.
12-18-2012 09:43 AM
Hello Mahesh,
Yes, it can be done,
Let me provide you the following information:
About QoS
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008080dfa7.shtml
About OSPF
12-18-2012 09:43 AM
Hello Mahesh,
Yes, it can be done,
Let me provide you the following information:
About QoS
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008080dfa7.shtml
About OSPF
12-18-2012 11:37 AM
Hi Julio,
Many thanks
Regards
Mahesh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide