qos pre-classify on a sup720 in a Cat6509

[pwenger]

Hi

I got a Cat6509-NEB-A with a SUP720-3BXL and a SPA-IPSEC-2G. I'm running IOS s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(18)SXF8.
There is IPSec in Tunnel Mode with an encrypted IP GRE Tunnel configured to reach 3 Branches.

As one branch is implementig IP- Telephony I need to configure QoS.

It is not possible to configure the qos pre-classify command on the crypto-map and on the tunnel interface.
Is this supported on a sup720 or will I have to upgrade?

Regards
Peter

[Jennifer Halim]

"qos pre-classify" is not supported on Cat6k.

Here is the URL for your reference:

http://www.cisco.com/en/US/partner/docs/interfaces_modules/shared_port_adapters/configuration/6500series/76ovwvpn.html#wp1089276

[francisco_1]

Peter,

Unfortunately qos-preclassify is not supported on the  c6500 platforms.

Francisco

[Lei Tian]

Hi Peter,

As long as you done your classify and marking on the LAN side, you don't need qos pre-classify on your tunnel. The ESP header will keep the DSCP value by default.

HTH,

Lei Tian