cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
568
Views
0
Helpful
2
Replies

recurrent disconnection AnyConnect users

resaga
Level 1
Level 1

we have three  ASA 5540 with

Cisco Adaptive Security Appliance Software Version 8.4(5)

Device Manager Version 6.4(9)

this devices are only for remote conections (webvpn/ssl-web/anyconnect),

and we are having problems with connections anyconnects;  are released every 15 seconds, the version anyconnect is 2.3.0254

is there  a conflict of versions or a bug that could be picking up???

is there  a compability matrix betwen Software Version of ASA and Anyconnect ????

2 Replies 2

ju_mobile
Level 1
Level 1

Renato,

The AnyConnect client is now at least 3 or 4 versions ahead of the version your using. I would recommend upgrading to a later version. However, can yo be a bit more descriptive about your connection issues to see if we can work those out?

By making some drastic assumptions and shooting from the hip,we could be looking at mtu issues or a myriad of other faults.

Best Regards

Julian

Sent from Cisco Technical Support iPad App

hi Julian

Upgrade to version 2.5 (anyconnect) and perform connection test and do not present this problem,

the only thing is that the done in a time of low load, was the only one connected.

When testing at high traffic times I commented as I was