Hi,
I have an ASA 5515 with 9.1 set up and everything works, users from inside can use Remote Access VPN to connect to Meraki MX. The I tried to add site-to-site VPN and that break the Remote Access. As temporary solution I stripped everything I added and it still not working.
Any suggestion?
Thanks in advance!
Netcruiser
Here is the sanitized config:
asa# sh run
: Saved
:
ASA Version 9.1(1)
!
hostname asa
enable password MumM3b.5z/4iYZJp encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address x.x.74.34 255.255.255.248
!
interface GigabitEthernet0/1
nameif inside
security-level 100
ip address 10.1.1.1 255.255.255.248
!
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/4
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/5
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
management-only
nameif management
security-level 0
ip address 192.168.1.1 255.255.255.0
!
ftp mode passive
dns server-group DefaultDNS
domain-name netskope.com
same-security-traffic permit intra-interface
object network obj_10.1.1.0_outside
subnet 10.1.1.0 255.255.255.248
object network inside-network
subnet 10.1.1.0 255.255.255.248
object network obj-8.8.8.8
host 8.8.8.8
object network LOCAL
subnet 10.57.0.0 255.255.0.0
object network REMOTE
subnet 172.16.0.0 255.240.0.0
access-list INSIDE_IN extended permit ip any any
access-list INSIDE_IN extended permit icmp any any
access-list OUTSIDE-IN extended permit icmp any any
access-list OUTSIDE-IN extended permit ip any any
access-list OUTSIDE-IN extended permit tcp any any
pager lines 24
mtu outside 1500
mtu inside 1500
mtu management 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
icmp permit any outside
icmp permit any unreachable outside
icmp permit any echo outside
icmp permit any echo-reply outside
icmp permit any time-exceeded outside
icmp permit any inside
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
!
nat (inside,outside) after-auto source dynamic any interface
access-group OUTSIDE-IN in interface outside
access-group INSIDE_IN in interface inside
route outside 0.0.0.0 0.0.0.0 x.x.74.33 1
route inside 10.57.1.0 255.255.255.0 10.1.1.4 1
route inside 10.57.40.0 255.255.255.0 10.1.1.4 1
route inside 10.57.50.0 255.255.255.0 10.1.1.4 1
route inside 10.57.60.0 255.255.255.0 10.1.1.4 1
route inside 10.57.66.0 255.255.255.0 10.1.1.4 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
no service password-recovery
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
anyconnect-essentials
username nsadmin password ylquIhYGIShcsAFT encrypted
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect icmp
!
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email callhome@cisco.com
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly 12
subscribe-to-alert-group configuration periodic monthly 12
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:22df3522c377e58117de5214c362d494
: end
