remote inlogen switches

[pcfreak49]

I have a question, it is sometimes possible to remotely log into a layer 2 switches?

[mrdogantr]

Hi,

     Yes, it's possible. You must set ip and defaul gw.

For example;

interface Vlan1

ip address 192.168.1.2 255.255.255.0

ip default-gateway 192.168.1.1

line vty 0 4

password cisco

enable secret cisco

hth

Muammer

[pcfreak49]

is it possible to make another network to connect to the switches

[mrdogantr]

Yes it's possible. You can test with GNS3 or Cisco Packet Tracer.

hth

Muammer

[pcfreak49]

how can configure it on the layer 2 switches this is for my studies