03-15-2011 09:41 AM
hi all,
how i can use both LDAP Authentication and local user database to authenticate the remote vpn clinet in asa 5505?
when i try to do the things either only one method is working both are not working at a time.
help me in this matter
thanks
cyril
03-15-2011 01:40 PM
I don't think you can do that.
ASA will check the second one unless the first one is not response to the authentication request.
So, you might have to create another tunnel-group which will use local authentication only and user have to pickup which tunnel -group to use depended on how it will be authenticated.
03-16-2011 12:50 AM
Hi,
If you are trying to do double authentication with IPsec VPN client then it is not supported.
Double authentication with the Anyconnect client is supported.
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/vpngrp.html#wp1243545
Hope this helps.
Regards,
Anisha
P.S.: please mark this post as answered if you feel your query is resolved. do rate helpful posts.
03-30-2012 02:01 AM
Hello Anisha,
I am having the query on the same.
Double authentication in vpn means authuthentication in both ways ( eg: local & ldap).
Whether it is supported for IPSec remote access VPN on Cisco ASA 5540 with ios version 8.0(4).?
Either it is supported on any other versions..?
Kindly do help me to get the info..it would be very much grateful.
Sri
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide