05-31-2006 05:13 AM - edited 02-21-2020 02:26 PM
Hi,
Soho91 on one side, VPN client on the other side.
I would like to configure my router to give an IP to the client in the same subnet as the inside router 's interface (doing so, no static route would be necessary on my servers to answer the client)
Thanks
05-31-2006 11:21 AM
Create a new subnet for the connected VPN clients and you need to add a static route at your main router at your private network in order for the inside servers respond to the connected VPN clients. If you use the same subnet as the servers, the response traffic from the servers will not reach VPN clients (since the connected VPN clients have the same subnet as the servers. i.e. the servers will not pass this traffic for their G.W).
I hope to be helpful, if you any more questions please don't hesitate to ask again.
Please rate if it does.
Abd Alqader
06-01-2006 06:08 AM
Thank you for your reply.
That's the answer I expected and I agree with you but I'm a bit confused : I use a VPN connection to reach a customer of mine, I get IP 192.168.18.11/25 dynamically and I can make a RDP connection on a PC (192.168.18.124/25) on this subnet behind the VPN router at the remote site !!
I wonder if the VPN router use proxy arp for the response packet from the PC?
06-01-2006 10:58 AM
Did you try any other application other than RDP?
06-01-2006 11:33 AM
Specific VPN devices, such as the VPN concentrator, support the use of internal DHCP servers for remote VPN clients via proxy arp.
06-01-2006 11:31 PM
Thank you for the help !!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide