05-24-2008 06:08 PM
I just replaced my PIX501 with an ASA5505. I'm not real familiar with Cisco Products, but I'm comfortable with it. I'm attaching my config list. I can connect to the VPN just fine, but I can't ping or connect to anything on the Local LAN. I really appreciate the help!!!
06-03-2008 11:30 AM
06-03-2008 07:50 PM
change your access list to allow VPN IP pool network to inside 192.168.1.0 network
your inside network is 192.168.1.0/24 , your vpn local pool network is 192.168.2.0/24
remove
no access-list inside_nat0_outbound extended permit ip any 192.168.2.96 255.255.255.224
no access-list inside_nat0_outbound extended permit ip any 192.168.2.0 255.255.255.0
replace with
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
try connecting and access inside hosts from vpn client and let me know the results.
Rgds
-Jorge
06-04-2008 03:43 PM
Split Tunnel is the response!!!
06-05-2008 05:28 AM
That's what i was missing!
THANKS!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide