I have a setup wich includes a site-to-site VPN between two RV320 routers.
Everything is fine except for one reason, I need that users at LAN 1 connects to a network that is behind another router after Router2, for example:
VPN Router 1 Lan: 10.10.0.0/24
VPN Router 2 Lan: 10.20.0.0/24
Traffic between them works fine.
At the Router2 Location, we have another router on the same subnet. This router is connected to a MPLS to another location with Subnet 192.168.100.0/24.
All the advanced routing information only have LAN/WAN/USB interfaces as gateways, I think if it have a Tunnel1, 2, 3 as interfaces, maybe it should work?
Is there any way to tunnel the communication between Router 1 Lan and Subnet 192.168.100.0?
Thank you.