RV160 OpenVPN Connected but no access to LAN

[bilvi]

I can connect to the VPN via OpenVPN but can not see any of the network.

I have added the RV160 to my network remote work. It has it's own public static IP. I can connect but not get to the other computer/printers/servers on the network.   

The vlan is configured as 192.168.1.132/24 and I have DHCP set as relay as my dhcp server is 192.168.1.74.

The main computer I am trying to access (web server not for the public) is 192.168.1.164 and I can ping it from the Administration / Diagnostic / Ping Address on the router so I know the router can see that address. Also trying to access a couple of computers running RDP.

The OpenVPN Client Address Pool is 10.1.4.0 and I get a address assigned of 10.1.4.2 when connected. The Tunnel Mode is Split and set to the following 192.168.1.0 / 255.255.255.0   I thought this should allow me to see and of the 192.168.1.x devices?

I can not access 192.168.1.164 from the remote computer.

Any thoughts?

[lf]

Hello

I am having the same problem. I can connect to anywhere except to the hosts in the listed network (to be connected through the VPN).

BTW: I could connect using OpenVPN 2.5.9 for Windows. Using 2.6.3 there is a TLS error. Adding "tls-version-min 1.0" to the generated file did not help. 

Anyone?