I am replacing two Netgear ProSafe routers with a pair of RV340s, I have setup the IPSec tunnel between and the two routers can ping each other but neither can ping any of the other PCs on each end even though the PCs are pingable internally. I used the wizard to setup the Site to Site, I have tried using all three IPSec profiles and have even created my own and get all of them to connect but no pings are happening. The IPs at one end are 192.168.31.x and the other is 192.168.29.x. The only advanced setting I enabled was netbios.
Any suggestions where I should start looking for the problem
