Secure site to site VPN with client based VPN

[wchin]

I am currently in a situation where I have to create a site to site VPN. This site to site VPN will involve communications between 2 servers. In addition, some of my tech support staff will ocassionally need to access the remote server to perform some tasks. The users are on DHCP. I do not want to open the entire DHCP range to the site to site VPN. Is there a way to create a vpdn or vpngroup on the PIX that the internal users can connect to and the from there access the site to site VPN? Or are there better solutions?

[ciscomoderator]

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you, or there is no public information available at this time. If you don't get a suitable response to your post, you may wish to review our resources at the online http://www.cisco.com/go/solutions. You may also contact our product information line at 1-800-553-NETS or a Cisco Systems Engineer at your local Cisco office or reseller. To locate your local Cisco representative, visit http://www.cisco.com/warp/public/687/Directory.shtml

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.