vpn virtual ip address space in a pix firewall

[n.velandia]

hi, we need some help with the following topic:

We want to gain acces to a internal server in my inside interfase usin PPTP VPN, actualy the vpn configuration is ok. but we access the server in tow ways:

with his real IP address ( using nat (inside )0 access-list nonat)

or with one public valid ip address ( using static command )

In the VPN we define a local pool for VPN client ( 192.168.1.1-192.168.1.4 ) and i want to use a virtual address ( fo example 192.168.1.20 )in order to access this server via VPN.

some one can send me a solution ( pix configuration )

Tanks

dolphin

[ciscomoderator]

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.