setting up site to site with vpn 3002 and pix 525

[jczahor01]

I am new setting up vpn on cisco equipment and am not sure what I need to do to configure a site to site between a pix 525 and a vpn 3002. we are setting up a remote office for a couple of months and need to have secure communication during this time and were told that this will work. Can anyone help me out with this? I tried looking for any tech docs using this combo of equipment but could find anything good.

Thanks!

John

[jmia]

John,

Read the following documents, I think you need the 2nd document.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00800949d2.shtml

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00800941ea.shtml

Hope this helps out and let me know if you need further help. Please rate replies if it helps you.

Thanks,

Jay

[jczahor01]

Thanks Jay!

This looks like what I am looking for!

John

[jczahor01]

I noticed that the article said pix version 6.3(1). I have 6.2(2). will it work the same?

john