Setting up VPN on FirePower 1010

[AmmarHermiz14196]

Hi,

Trying to set up a VPN connation to my home firewall FPR 1010. The plan is to have access from my phone or any computer to my home networks, so I have few questions:

1- Do I need a license? if not that will lead to question 2 

2- There is a script/instruction how to set it up?

Thanks! 

[Rob Ingram]

@AmmarHermiz14196 yes you will need a RAVPN license, you do not get any free licenses like you did with the ASA.

You will need either the AnyConnect Plus, Apex or VPN only license, you can purchase this from your reseller. Reference https://www.cisco.com/c/en/us/products/collateral/security/anyconnect-og.html

You will obviously need AnyConnect license and entitlement to download the anyconnect software.

Here is the guide to configure once you are licensed.

https://www.cisco.com/c/en/us/support/docs/security/anyconnect-secure-mobility-client/215532-configure-remote-access-vpn-on-ftd-manag.html

[AmmarHermiz14196]

Thank you, Rob!

I looked at AnyConnect plus and AnyConnect Apex. Any recommendation which one I should go with? Just need the VPN connection to access to my home networks nothing fancy.  Also, my FTD version is 6.6.1 if you have a license code in mind you recommend for this FTD would be highly appreciated.

Thanks.   

[Rob Ingram · Accepted solution]

@AmmarHermiz14196 if it's just for home go with the basic license, which is Plus. Note the minimum user license size is 25.

L-AC-PLS-3Y-S1

Cisco AnyConnect Plus – 3-Year License

25-99

[AmmarHermiz14196]

Thank you Rob!!! very helpful.