ā09-29-2010 05:47 AM
Need advice/suggestions on being compliant with FIPS-140, I have configured IPSEC VPN tunnels between C2811 routers and passing unclassified traffic using 3DES encryption and SHA MD5 and shared password and in transport mode. Thanks for any help
Solved! Go to Solution.
ā10-03-2010 06:18 AM
Hi Steve,
This link would provide you with all the information regarding the FIPS complicant encryption algorithms for theIPSec vpn tunnel:
http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/140sp/140sp1038.pdf
(In the above link, refer to section 3.3, IPsec Requirements and cryptographic requirements)
Following algorithms are not FIPS compliant.
DES
MD-5 for signing
MD-5 HMAC
Let me know if this provides you with the required information.
Cheers,
Rudresh V
ā10-03-2010 06:18 AM
Hi Steve,
This link would provide you with all the information regarding the FIPS complicant encryption algorithms for theIPSec vpn tunnel:
http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/140sp/140sp1038.pdf
(In the above link, refer to section 3.3, IPsec Requirements and cryptographic requirements)
Following algorithms are not FIPS compliant.
DES
MD-5 for signing
MD-5 HMAC
Let me know if this provides you with the required information.
Cheers,
Rudresh V
ā10-04-2010 05:33 AM
Thanks Rudresh, that was exactly the information I needed!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide