09-24-2013 02:25 AM
Hi,
I have a Cisco 1812 router which is setup for remote access VPN using IPSec (Cisco VPN Client), my question is can I configure a Cisco ASA 5505 to connect to the router as a site-to-site VPN.
Thanks
Karl
Solved! Go to Solution.
09-25-2013 02:47 AM
Dear Karl,
Yor are right, in this case either you can created a site to site vpn tunnel between the devices or you can setup your ASA as a VPN hardware client. ie; Easy VPN.
For the same you can refer the below document.
Regards,
Shijo.
09-24-2013 04:22 AM
Dear Karl,
Yes, you can create at Site-to-Site VPN tunnel between the devices. Please refer the below link.
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00805e8c80.shtml#diag
Regards,
Shijo.
09-24-2013 05:51 AM
Hi Shijo,
Thanks for document very helpful, one last question?
Since I already have the router setup for remote access for end users to VPN into the local LAN can I use the existing setup on the router, an just configure the ASA to connect to the router.
I know on routers you can setup an Easy VPN Remote which connects to an Easy VPN Server which is what I have setup, so the ASA should be able to do the same would you agree?
Many Thanks
Karl
09-25-2013 02:47 AM
Dear Karl,
Yor are right, in this case either you can created a site to site vpn tunnel between the devices or you can setup your ASA as a VPN hardware client. ie; Easy VPN.
For the same you can refer the below document.
Regards,
Shijo.
09-25-2013 02:27 PM
Thanks for this just what was required.
09-24-2013 05:37 AM
As mentioned by Shijo, it is no problem to do that. Just make sure that the crypto-map-sequence that you use to apply your dynamic crypto-map is always higher then the sequences you use for site-to-site. That's a config-mistake I have seen more then once.
--
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide