Site to Site VPN with Full Internet tunnel one Site has a static IP

[heshamcentrino1]

Dear All Members, 

I am trying to set up the 819 4G Router as a VPN Client (Router) with the purpose of full internet tunnelling.
The goal here is the Remote users behind the 4G Router when he travels overseas and connect to any 4g network and when he does whats my IP? He gets the static IP of the Home Network 193.237.X.X----.->

Basically, I am trying to set up a network similar to EXPRESS VPN or  BearVPN

I have one static IP at home, but the remote router may sometimes have a CGNAT IP or a Dynamic IP address?

I have googled and searched this forum to see whats the best configuration method for it. Please help me with the Home Router and Remote router configuration that makes it work.

Currently I have the 3945E Home router has Anyconnect with full tunnel that works with anyconnect endpoints (e.g. iPhone , Android , Windows PC) but not a router

[heshamcentrino1 · Accepted solution]

I was able to make it work after the help of @ccieexpert and @MHM Cisco World  Thank you so much for all your help. The only problem that was found. My ACL in the HUB had ip permit any any that made all the problems :'(

Now everything works perfectly

[ccieexpert · Accepted solution]

Yes indeed the permit ip any any in the NAT acl was natting the inbound traffic and causing issues. This is a common problem seen. Glad i was able to help

[heshamcentrino1]

@ccieexpert I can't thank you enough for your efforts and I really appreciate it