Hey guys,
I'm super new - I completely apologize. I'll try to describe my problem, let me know if I need to provide any additional information.
I inherited a 5510 with 8.2.5 on it, writing the config to upgrade to current (and thus, going through the 8.3 code changes)
The device is currently set up with a site to site tunnel to one of our other sites on the OUTSIDE interface.
It also accepts VPN users on the OUTSIDE interface.
VPN users need to be able to have connectivity to devices on the INSIDE interfaces as well as our other sites on the OUTSIDE interface.
Do I write separate NAT statements for both the vpn users for both inside, and outside?
Example:
nat (outside,inside) source static VPNUSERS VPNUSERS destination static INSIDESTUFFS INSIDESTUFFS
nat (outside,outside) source static VPNUSERS VPNUSERS destination static OUTSIDESTUFFS OUTSIDESTUFFS
Thanks for your insight.