09-28-2021 05:39 PM
Hello, I am trying to create a site2site with following;
site A: IP 10.123.0.x
site B: IP 10.0.0.x
10.0.0.x is not an IP which is on the Interface. The interface IP is 10.10.0.x.
There is a route 10.0.0.0 gateway 10.10.0.x
The tunnel is up, but site B makes to TX. RX is fine. I tried all sorts of NAT and ACL combinations, also any any. But Site B does not send packets..
Could you help me?
Thanks!
09-28-2021 07:33 PM
Hi,
what are the devices you are using to establish VPN? have you added mirror routes between two sites?
KB
09-28-2021 11:34 PM - edited 09-28-2021 11:42 PM
Hi, Site A is an ASA5510 and Site B is an ASA5585 with contexts. No, I did not add mirror routes, I am also not sure what those are..
Tunnel and traffic is working if configuring VPN with 10.10.0.x as local network on B, but that was clear...
Initiating the ping from Site B does not even bring the tunnel up.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide