spoke ( vpn client ) to spoke ( vpn client ) traffic with ASA

[r.carreras]

Hello,

I would like to know if it's possible to enable traffic between two vpn clients using the same IP pool. I have seen that it's possible between a remote LAN-to-LAN VPN and a remote VPN Client.

I have found this document :

http://cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008046f307.shtml

But this document explains the procedure for remote LAN to VPN Client. I need the same but for two VPN Clients using the same IP Pool.

Any ideas ?

Thank you.

[didyap]

Communication between two VPN clients can be accomplished if you override the Tunnel Default Gateway. This feature is also known as Hairpinning. Following link may help you

http://cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00804675ac.shtml