Hello,
I created a simple config file, listed below, and tried to copy and paste this config on a 2960-8Port switch. After pasting this file, I receive as error message when I issue this command "show ip ssh SSH Disabled - version 1.99 % Please create RSA Keys to enable SSH (of at least 768 bits size) to enable SSH v2. Authentication timeout: 120 secs; Authentication retries: 3"
I can't figure out why ssh v2 won't enable. I've tried it on several boxes/switches but I still receive the same error message.
Any idea as why this happens.
Thanks in advance.
Best, ~zK
no service pad
no service password-encryption
hostname Sales-SW-ACC2
ip domain name my.company.come
boot-start-marker
boot-end-marker
enable secret 5 xoadou435o4nadgaet!%Aou2
no aaa-new-model
ip dhcp pool 10.0.0.0
network 10.0.0.0 255.255.255.0
lease 0 0 10
service dhcp
spanning-tree mode past
spanning-tree pordtfast default
spanning-tree extend system-id
vlan internal allocation policy ascending
crypto key generate rss generate-keys modulus 1024
interface GigabitEthernet0/1
interface GigabitEthernet0/2
interface GigabitEthernet0/3
interface GigabitEthernet0/4
interface GigabitEthernet0/5
interface GigabitEthernet0/6
interface vlan1
ip address 10.0.0.1 255.255.255.0
ip sea enabled reaction-alerts
ip dhcp excluded-address 10.0.0.1 10.0.0.10
line console 0
line vey 0 4
privilege level 15
transport input telnet
line vty 5 15
no login
end