cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1221
Views
0
Helpful
3
Replies

SSL over IPSEC

Ben Alex
Beginner
Beginner

Hi:

Can I  on the same PC  open an IPSEC tunnel then an SSL tunnel using anyconnect. ( tunnel over Tunnel)

Can I on the same PC open an SSL tunnel over another SSL tunnel using Anyconnect.

Thanks

Ben

1 Accepted Solution

Accepted Solutions

Yes, you are right.

You can't use AnyConnect to open both IPSEC and SSL VPN.

But you can use Cisco VPN Client for IPSec and AnyConnect for SSL and that would work.

View solution in original post

3 Replies 3

Jennifer Halim
Cisco Employee
Cisco Employee

Yes, you should be able to connect to IPSec tunnel then SSL tunnel after that.

For SSL over SSL tunnel, i don't believe you can do that because once you are connected to AnyConnect to the first tunnel, there won't be option for you to connect to another SSL VPN peer as the box will be greyed out.

Thanks for replying.

In our case we wanted to use anyconnect to open both IPSEC and SSL.

So I guess this is not possible.

And if we use the cisco vpn client for IPSEC and anyconnect for ssl it would work.

Can you confirm if the above is correct.

Thanks for your feedback.

Yes, you are right.

You can't use AnyConnect to open both IPSEC and SSL VPN.

But you can use Cisco VPN Client for IPSec and AnyConnect for SSL and that would work.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: