Support for Windows 7 Embedded OS

[Amit Arora]

Hi Team,

ISE posture is working fine for windows 7,8,10 desktops.

ISE posture is not working in Thinclients machine running with Windows Embedded 7 OS . Anyconnect Posture Module System scan  says “Operating system is not supported with Server”.

ISE 2.0 Network Component Guide says that  

https://www.cisco.com/c/en/us/td/docs/security/ise/2-0/compatibility/ise_sdt.html 

Cisco ISE does not support the Windows Embedded operating systems available from Microsoft. 

However 2.3 does not list that. 

https://www.cisco.com/c/en/us/td/docs/security/ise/2-3/compatibility/ise_sdt.html#pgfId-123698

Would like to verify if its supported or not.

Does this limitation applies to Any-connect NAM Module also or only with Any-connect ISE Posture Module?
If its not supported is there any alternative to bring Windows Embedded 7 OS into network?

Thanks

Amit

---

---

[hslai]

As you already tested it and shown not supported, please log a doc bug to correct the info in ISE CCO doc.

AFAIK the teams have not verified AnyConnect modules on embedded Windows OS so unlikely to claim support.