06-26-2002 02:16 PM - edited 02-21-2020 11:50 AM
I will like to telnet to a pix at a remote site.
The configuration I have is VPN. Central VPN3005 all remotes are PIX501.
The VPN works fine no problem, but I will like to remote administer the pix'es.
how can I configure the pix so I can telnet it through the VPN.
The VPN is L2L.
06-26-2002 02:16 PM
you can enable SSH on the pix firewall, and then just create a secure shell to the pix.
Here is how you do it:
http://www.cisco.com/warp/public/110/authtopix.shtml#E
06-26-2002 03:00 PM
Securing a Telnet Connection on the Outside Interface
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_60/config/config.htm#xtocid40
HTH
R/Yusuf
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide