Token authentication for SSL VPN on ASA

[david.buitendag]

I am replacing 2 pix's with an ASA and I have configured an SSL vpn tunnel on an ASA and like the previous client vpn I would like the authentication to be done via token authentication. IN the pix configuration this was done by using AAA-server RADIUS

crypto map newmap client token authentication RADIUS

vpngroup ciscovpn authentication-server RADIUS

WIth the ASA's the token authentication command is no longer valid.

Does anyone know how this is done using the ASA's running ver 7.2?

Thanks!!!

[b.hsu]

For more inof in Authentication between ASA and rsa token server try these links:

http://www.cisco.com/univercd/cc/td/doc/product/multisec/asa_sw/v_7_2/conf_gd/general/aaa.htm#wp1053066

http://www.cisco.com/univercd/cc/td/doc/product/multisec/asa_sw/v_7_1/conf_gd/examples.htm#wp1027136

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00806ea271.shtml

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008060f261.shtml

[david.buitendag]

Thanks all... it turns out that it was the RSA server stopping me from connecting.