Everyone,
I have a PIX 501, and I am trying to configure it as a PPPoE Client. I used the following configuration:
ip address outside pppoe setroute
ip address inside 192.168.2.1 255.255.255.0
vpdn group PPPoE_Test request dialout pppoe
vpdn group PPPoE_Test localname PPPoE_Test
vpdn group PPPoE_Test ppp authentication pap
vpdn username "SBC Provided username" password "SBC provided password"
I've tried to use the debug pppoe event, error, and packet, but there isn't any type of session attempting to be established. I am at a loss as to why it isn't working. Any suggestions will be greatly appreciated!
Thanks,
Matt