04-24-2003 12:39 PM - edited 02-21-2020 12:29 PM
We need to tunnel between two 3000 series concentrators. When the tunnel request is made, we need for the user to have to authenticate using our NT domain through ACS. I guess my question is first, is this doable and second, is there an example configuration that I have missed. The key is the user authentication. We need to make sure that no one has access to our network without a "need-to-know" basis. Can you set up two concentrators in a client-server mode like this?
Thanks
Dwane
04-30-2003 08:35 AM
The concentrator will not be able to have the users authenticate via ACS for network access. It will only do authentication for VPN access. You will need the router or a PIX to send authentication requests to the ACS server.
05-08-2003 06:18 AM
Can you elaborate on the setup and the syntax for this? Do I put the router behind my concentrator and how would I do this? My understanding is that the users at the distant end would need to http into somewhere to authenticate. Is this true? How would I do that? Thanks for the input.
Dwane
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide