
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-29-2011 06:15 AM
Has anyone or does anyone know how to put two vpngroup vpnadmin dns-server addresses on a PIX 515E? I am trying to set up a second DNS Server and without the command in the PIX my VPN clients cannot authenticate through the PIX on the second DNS Server. I have tried several times to put the command in but it keeps removing the existing one and replacing it with the one I try to put in. Any help would be appreciated.
Randy L Brown
Solved! Go to Solution.
- Labels:
-
VPN
Accepted Solutions

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-29-2011 02:53 PM
Great to hear and thanks for the update.
Pls kindly mark the post as answered so others can learn from your post. Thank you.

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-29-2011 06:38 AM
You can configure both DNS server on the same command as follows:
vpngroup vpnadmin dns-server
Hope this helps.

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-29-2011 10:17 AM
Thank You very much, I tried that once before but must not have done it correctly because it works now.
Randy L Brown

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-29-2011 02:53 PM
Great to hear and thanks for the update.
Pls kindly mark the post as answered so others can learn from your post. Thank you.
