cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
454
Views
0
Helpful
1
Replies

VPDN: user with static IP

mkazmierski
Level 1
Level 1

Hello,

I want to create a remote access to my router in such way that one user always get the same IP address while other users will have IP from the pool. Currently my configuration is following (all users get IP from MyPool):

vpdn enable

!

vpdn-group PPTP

accept-dialin

protocol pptp

virtual-template 1

!

interface Virtual-Template1

ip unnumbered Vlan10

ip nat inside

peer default ip address pool MyPool

no keepalive

ppp encrypt mppe auto required

ppp authentication ms-chap-v2 ms-chap callin PPTP

!

ip local pool MyPool 10.0.0.1 10.0.0.20

Regards, Mark

1 Reply 1

adamclarkuk_2
Level 4
Level 4

I think you are going to need a radius server to do this as you want to single out a single user.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: