09-12-2012 07:48 AM
Hello Everyone,
We have Cisco VPN 3000 device at our company and I need assistance regarding below query:-
As soon as I got connected to vpn device via serial console, the chain of event logs keep on coming on console window and it doesn't even allow me to log in. I could only able to login via console when i unpluged network cables from it. Any idea why is it happening and how to fix it?
Thanks,
Sachin
09-12-2012 08:12 AM
Hi Sachin,
Once on the console (with the cable unplugged) do this:
1) Configuration
2) Administration
3) Monitoring
4) Save changes to Config file
5) Help Information
6) Exit
Standard Forwar~: Main -> 1
1) Interface Configuration
2) System Management
3) User Management
4) Policy Management
5) Tunneling and Security
6) Back
Standard Forwar~: Config -> 2
1) Servers (Authentication, Authorization, Accounting, DNS, DHCP, etc.)
2) Address Management
3) IP Routing (static routes, OSPF, etc.)
4) Management Protocols (Telnet, TFTP, FTP, etc.)
5) Event Configuration
6) General Config (system name, time, etc.)
7) Client Update
8) Load Balancing Configuration
9) Back
Standard Forwar~: System -> 5
1) General
2) FTP Backup
3) Classes
4) Trap Destinations
5) Syslog Servers
6) SMTP Servers
7) E-mail Recipients
8) Back
Standard Forwar~: Event -> 1
1) Enable/Disable Save Log on Wrap
2) Format for Saving Log
3) Enable/Disable FTP Save Log on Wrap
4) Set E-mail source address
5) Set Event Forwarding
6) Format for Syslog
7) Back
Standard Forwar~: Event -> 5
1) Which Events get Logged
2) Which Events go to the Console
3) Which Events go to the Syslog
4) Which Events go to E-mail
5) Which Events go to SNMP Trap
6) Set General Event List
7) Back
Standard Forwar~: Event -> 2
Which Events are Sent
0 : No Events
1 - 13 : Maximum Event Severity Level (see table below)
99 : Use General Event List
The following is a description of the Event Severity Levels
Severities 1 - 3 are Warning : 1 - Fault 2 - Warning1 3 - Warning2
Severities 4 - 6 are Info : 4 - Info1 5 - Info2 6 - Info3
Severities 7 - 9 are Debug : 7 - Debug1 8 - Debug2 9 - Debug3
Severities 10, 11 are Decodes: 10 - Hdecode 11 - Ldecode
Severities 12, 13 are Dumps : 12 - HdrDump 13 - PktDump
The maximum allowable severity for this menu item is 5
> Which Events go to the Console
Standard Forwar~: Event -> [ 1 ] 1
Then connect the 3K to the network. If you try to open the console, do you see the same issue?
Thanks.
Portu.
Please rate any posts you find useful.
09-13-2012 06:10 AM
Hi
Thanks for your reply!!!
I tried to change the setting to "Severity 1" and "Null" for the option "Event go to console" but then even seeing logs at console however I have only saved the changes and have not rebooted the device after each change, hope rebooting is not required... Please advice further.
Thanks,
Sachin
09-13-2012 06:28 AM
Sachin,
It should be done, I think you may need to save the changes and reboot the 3K.
Let me know.
Portu.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide