05-21-2011 06:51 PM
Hey All
I'm currently setting up two VPN 3000 Concentrators at two different sites to create a IPsec LAN-to-LAN Tunnel.
I have gone through all the basic configuration guides on the CISCO site, but a LAN-to-LAN session is never created. I have enabled the logs on the Concentrator and it displays no errors at all - it appears the Concentrator is not even trying to establish a IPsec LAN-to-LAN Tunnel.
After running through the standard setup provided by CISCO, is there anything I need to do to make the Concentrator try to create a Tunnel, or should this be automatic once all settings are in place?
Thanks for your help
05-22-2011 05:45 PM
Ok, maybe the problem is a little open to heaps of issues that could be causing this.
If I go through the setup again, when will the logging system start producing error/connection information?
Also it might help to know the Concentrator 3000 is behind a Billion ADSL/Firewall Modem. The modem has a static public IP address, does the Concentrator use this same address or does it have to be configured differently?\
Thanks
05-28-2011 06:56 PM
Tried starting from scratch on the VPN 3000, but still not able to get a tunnel created.
I believe it has something to do with my setup between the concentrator and the ADSL modem. I have the required ports open but still nothing is happening.
Any ideas for me to try.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide