cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1730
Views
0
Helpful
1
Replies

VPN 64 bit client is not working properly

yayasolenet
Level 1
Level 1

I have a user using windiows 7 64 bit. I tried vpnclient-winx64-msi-5.0.07.0290-k9.exe and vpnclient-winx64-msi-5.0.07.0440-k9.exe. Installation is fine. Connecting is fine. But no traffic goes through.

The remote end cisco is 1811 VPN Server split tunnel. User get authenticated by Radius server.

After connected, user get the correct IP address. In router, sh crypto session, it has SA, etc. But sh ip route, can't find the Static route point back to the client IP like other connections.

At user end, windows show the IP address but no gateway. Windows route print shows the VPN network via gateway xxx.xxx.xxx.1 which is not available.

Has anyboy experience this?

Other 32bit users have no issues with VPN.

1 Reply 1

Parminder Sian
Level 1
Level 1

Hi,

Once connected with vpn client, what routes do you get under Status > Statistics > Route details. Please share the running config and screen shots from the vpn client, if possible.

Regards,

Sian