VPN

I have one Hub Router, I have 2 ISPs and would like to set it up as a dual hub. I have configured two tunnel interfaces on the hubs and spokes, set the  ipsec profile to shared, etc.What i was trying to do was route-map the traffic for the two tunnel...

We have an ASA 5510 and have recently made the move from the Cisco VPN client to the AnyConnect client (version 3.0.3054).  I can make the VPN connection, I can ping any host on the LAN (by IP address, NetBIOS name, and FQDN).  I can also make a remo...

Hello,We have an ASA 5510 and are having issues supporting a client in Europe.  After about 5 minutes (sometimes it will last up to 30 minutes) we drop the connection with Reason 412:  The remote peer is no longer responding.  We are using the Cisco ...

Hello,I am setting up a VPN connection between our main site and a remote location. (currently using our backup ADSL line before sending over)I have setup debug SSH on the consoleThe tunnel works fine, and i can open an SSH session from the inside ne...

HiI have a authentication chalenge on my ASA.I have site to site IPSec VPN between to offices of one company. Everybody can communicate to each other, everything is open between those two subnets. In addition on local ASA remote users use remote-acce...

Hi friends,Can anybody post a sample configuration of DMVPN with one main hub or dual hub connected to few spoke sites, I am not familiar with DMVPN,I only worked in MPLS environment ,in future I may have to configure DMVPN.any sample configuration o...

Hello,I am actualy trying to make a remote access VPN between a ISR1921 and Windows 7 pro. I already managed to put a PPTP VPN with an authentication against our LDAP databse via radius. But our password are in SHA1 in our LDAP, so I had to let the p...

Hello Everyone,I am working on a solution that I would like to get some feedback on. I few months ago we deployed iPhones with some of our employees. As part of this, we used the Cisco Anyconnect client on the iPhone. We have a Cisco ASA 5510 on our ...

Ok,  I have issue with Mac to get connect to Cisco VPN. I have two system with OSX 10.7.1 one of them  is connection normally and the other didn't!!!the second one it established the connection and the log file shows DNS and IP and everything and the...

This is a weird one.I have one user that has started having issues with the anyconnect vpn client.  When he enters his username and password the client does not even attempt to contact the vpn server.  I have watched my ASA logs and the IP address as...

Dear all,we have a cisco ASA 5510 which is also used for lan2lan connections. we have the following "problem".certain companies can only have access when we allow. currently this has to be done via ASDM/SSH. is there a way to make this easier? e.g. v...

Does ASA5510 - support Windows Phone 7 device ?Regards.Kim

Hi,I have a situation that I'm having routing issues with, while on a VPN Connection. I can connect to my network using my Cisco VPN tool when I am not at the office, however, once I am connected, I need to remote desktop into another computer, and b...