I have an cisco 1111-8p router with static IP from ISP. I want to connect to my home network (192.168.1.0 /24) from any place. For example I want to connect via VPN (from work office or PC 200 miles away) to my network to check something on NAS server or look into home cameras ect.
How I can do this? Here is result of show ip route command.
I already have problems with step 2
Router(config)# crypto pki import IKEv2-TP pkcs12 bootflash:IKEv2-TP.p12 password cisco123
I assume that I need to generate some pki certificate. Otherwise I got this messege:
% Importing pkcs12...
Source filename [IKEv2-TP.p12]?
% Error: failed to open file.
*Jul 9 05:49:59.984: CRYPTO_PKI: status = 0x747(E_EOS : end of i/o stream): Imp orted PKCS12 file failure
*Jul 9 05:49:59.984: %PKI-6-PKCS12_IMPORT_FAIL: PKCS #12 Import into trustpoint IKEv2-TP failed.
Reason : Failed to import pkcs12 context
But on this decumentation I dont see that make any file like IKEv2-TP.p12
Is there any easier way to do this?