vpn cisco827 to Cisco827

[sre]

Hello,

I am trying to setup a vpn between two 827's on an adsl line (3 later), I have

done vpn's on Netscreen's, but I am a bit lost with the Cisco.

Could somebody point me too some good doc?

Would the "easy vpn setup" be any use to me?

Thanks very much

James

[mmellet]

The 827 is standard IOS config commands. These urls should help: http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/secur_c/scprt4/scipsec.htm

http://www.cisco.com/pcgi-bin/Support/PSP/psp_view.pl?p=Internetworking:IPSec

and some sample configs under the header “IPSec Router to Router LAN to LAN” on this page http://www.cisco.com/pcgi-bin/Support/PSP/psp_view.pl?p=Internetworking:IPSec&s=Implementation_and_Configuration

[ANGELO DE MASI]

Hi at all, please

i need some advice to configure a VPN using a pix525 and a cisco 827 ADSL. The corporate network has the pix with a leased line internet access and branch office has the cisco 827 ADSL. with just one public IP address assigned to atm interface and with PAT configured.

I tryed to configure isakmp and ipsec policy between two endpoints but it's not working, by debug i get continually : retrasmission of phase 1.

Could anyone help me? On atm port is used encapsulation aa5lsnap as adviced by my ISP? could i chahge it?

please!!!

every advice will be very appreaciate! Thanks in advance!!