ā11-11-2002 05:27 AM - edited ā02-21-2020 12:10 PM
Hi,
i have a big problem with the VPN Client an the Local LAN Access. I have a Pix 501 (6.22 +PDM 2.1) on the central side. The VPN Clients are some Computers from a other Company with their own Network. The VPN Connection over a DSL WAN connection works great, but the Clients donĀ“t have access to their own LAN. (some Fileserver...) If i allow the Local LAN access on the Cisco VPN Client, it doesnĀ“t matter. I read something about Tunnel-Splitting, but .... i try.... i try....
Thanks for any response... Sebastian
ā11-11-2002 01:45 PM
The only thing you can do is allow split tunneling on the pix because the local lan access feature is not supported on the pix just yet.
ā11-11-2002 04:58 PM
Hi,
thanks for your reply. But i just tried that.
I have two networks: The Client Network is 192.168.1.0/24 and the Central Side is 192.168.2.0/24
Do you have a running configuration with tunnel-splitting ?
Regards, Sebastian
ā11-13-2002 10:13 PM
You have to do something like:
access-list 101 permit ip 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0
vpngroup group_name split-tunnel 101
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/cmdref/tz.htm#xtocid12
Regards,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide