VPN client 4.02b to PIX 6.2

[mary_odriscoll]

I need help, I want to use VPN client software to to access a remote network off my corporate PIX. I am running VPN 4.02 client software on a NT workstation and Pix OS 6.2. Any docs anywhere would be a help?

[jsivulka]

I tried this setup recently using the document whose link is as pasted below. My setup used PIX OS 6.3 and Client Ver 4.0.3. The setup works perfectly for 3DES and for AES.

http://www.cisco.com/en/US/partner/tech/tk583/tk372/technologies_configuration_example09186a008009442e.shtml

[omcku]

It seems I'm haveing trouble getting to this link, I think it has something to do with the way I'm log in. You are log in as a Partner and I'm log in as a Customer. So when I click on the link is tells me Message #401: Authorization Required/Forgotten Password. If you could repost it, I would greatly appreciate it.

Thanks

[jsivulka]

Sure Matthew, The document is also available at

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008009442e.shtml