vpn client behind a sonicwall

[miller.mark]

I am trying to use a cisco vpn client ver. 4.8 to connect to a pix. The client is behind a sonicwall firewall. what ports do I need to open on the sonicwall to allow the client to work?

[ajagadee]

Mark,

Below are the ports that protocols that needs to be configured for Pix and VPN Client.

ISAKMP - UDP 500

ESP - Protocol 50

IPSEC Over UDP - UDP 4500 (Default)

IPSEC Over TCP - TCP 10000 (Default) - This

value is configurable and depends on what is Configured on the VPN Headend Device.

Let me know if it helps.

Regards,

Arul