02-22-2015 08:34 PM
Hi Mentors,
We're running vpn client using Cisco 1921. Windows and Mac gets connected but can't ping LAN. The secured routes in Windows vpnc only have local pool addresses all with a /32 mask. I believe it should have x.x.x.0/24 network of LAN. No issues using Linux box with any credentials used.
Your advice are highly appreciated.
Thanks, God bless.
Kind regards,
Will
02-23-2015 04:48 PM
The secured routes must contain the router's private network. Please modify your split acl to include it. Once you add that, the client should be able to access the network.
Regards,
Kamal
Note: Please mark answers if they are helpful.
02-23-2015 06:50 PM
Hi Sir,
Thanks a lot for the help. Already done that Sir. In fact the vpn users address are same with the local lan. The acl also gives all-access to vpn users to the local lan. Interestingly, only windows boxes had issues (7 and 8). Looking at the secured routes, it has the following: 192.168.1.101 /32, 192.168.1.102/32... 192.168.1.110/32 instead of a 192.168.1.0/24. Linux and mac are all good.
Please advice.
02-24-2015 08:18 AM
By 'local lan' do you mean the network behind the router or the LAN local to the client? Would be able to share the config?
02-26-2015 11:32 PM
Hi Sir,
I mean lan behind the router. The work around in some win 8.1 is to update dne that works with citrix. On the win 7 just clicking 'allow local lan' worked. On another win 8.1 it worked perfectly fine without any dne update.
Thank you very much Sir for taking time. Much appreciated! Till next time.
Thank you and God bless.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide