03-04-2008 11:44 PM
Can some one tell me how to configure both site to site VPN and Remote VPN in PIX 515 E (in a single pix device)? Currently the IOS version in the pix is 6.3(3).Thanks
03-04-2008 11:52 PM
Hi,
For site-to site VPN Look at :
http://www.cisco.com/en/US/docs/security/pix/pix63/configuration/guide/sit2site.html
For Remote Access look at :
http://www.cisco.com/en/US/docs/security/pix/pix63/configuration/guide/basclnt.html
I hope this helps.
Best regards.
Massimiliano.
03-05-2008 01:19 AM
Hi,Thanks for your reply :-) At present site-to-site configuration is there in my pix. It is working fine without any problem. But I need remote VPN also in the same pix.
For Remote VPN if I apply the below mentioned line means site to site vpn is getting disturbed
Crypto map outside_map interface outside (remote VPN)
The below line is used for Site -To -Site configuration
Crypto map client1 interface outside (S-T-S)
I need to configure BOTH Remote VPN and SITE TO SITE in the same pix.
Rgds,
KTR
03-05-2008 02:31 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide