07-22-2012 03:15 AM
Dear All
Iam able to connect VPN & able to get IP Address from VPN pool Iam using wireless provided by linksys router ( I.e DSl )
Iam able to send traffic but cant recive any traffic The packet is getting encrypted But NO decryption
Cant do RDP to any of my office server
AT the same time I use the same laptop & same cisco client software with another wireless provided by another 3G network IT WORKS Fine
Able to do RDP Able to send recive trafffic. Encryption/Decrytion all work fine
This there any issuse with routing or natting in linksys or need to check soem thing more
Kindly Advice
07-26-2012 05:55 AM
Hi Bashir,
Are you connecting to an ASA or a Router?
Thanks.
07-30-2012 12:56 AM
Dear Javier
VPN is configured on ASA
Iam connecting ASA
07-30-2012 05:15 AM
Hi Bashir,
Thanks for the update.
Checking on the client statistics, do you see "Transparent Tunneling" enabled on UDP 4500?
If you do, please add the following commands on the ASA:
1- capture capout interface outside match ip host outside_IP_ASA host your_public_IP
2- capture capin interface inside match ip host internal_RDP host VPN_client_IP
3- Try to access the RDP server, then "show capture capin and "show capture capout"
4- "show crypto ipsec sa peer your_public_IP".
5- Attach the previous outputs.
If you don't, "crypto isakmp nat-t 30"
Let me know if you have any questions.
Rate any post that you find helpful.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide