07-06-2008 08:38 PM - edited 02-21-2020 03:48 PM
Hi,
My Remote access VPN disconnects after 1 hr when I am doing some work (not idle)
FYI: VPn group idle & session timeout is none
07-07-2008 06:36 AM
*edit*
nevermind, i see you posed to the other forum also.
07-07-2008 08:32 PM
07-08-2008 12:42 AM
Hi,
Add the command "re-xauth enable" in each RA group where " re-xauth disable" is currently configured.
Then see if it still disconnects.
Please rate if this helped.
Regards,
Daniel
07-08-2008 12:53 AM
Hi,
This command is used for reauthenicate purpose means if it disconnects only try to reconnect again but my question is y it is disconnecting when i am working not idle below is the link
http://www.cisco.com/en/US/docs/security/asa/asa70/command/reference/mr.html
07-08-2008 11:40 PM
Hi,
Can you enable logging on the VPN Client and set it to High on all sections.
Then attach the log captured during the disconnect.
Remember to replace the sensitive info.
Regards,
07-10-2008 12:49 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide