vpn from a 1721 router to a Juniper srx 240

[lkadlik]

Hi,

Is it possible to set up a vpn tunnel on a 1721 router that uses the following ios:

c1700-y7-mz.124-13b.bin

I thought I had read somewhere that tunnels were not supported on the 1700s but wanted to make sure. If they are I would like to know if they are supported in the above ios.

Thank you.

[Jennifer Halim · Accepted solution]

Yes, 1721 supports termination of VPN tunnels and you require IP/Firewall Plus IPSec 56 or IP/Firewall Plus IPSec 3DES IOS feature sets.

Here is the datasheet for Cisco1721 router for your reference:

http://www.cisco.com/en/US/products/hw/routers/ps221/products_data_sheet09186a00800920ec.html

However, please kindly be advised that Cisco1721 has reached EOL:

http://www.cisco.com/en/US/prod/collateral/routers/ps221/prod_end-of-life_notice0900aecd8044473f.html

Also, the current ios that you have: c1700-y7-mz.124-13b.bin does not support IPSec. You would need to download IOS with IP/Firewall Plus IPSec 56 OR/ IP/Firewall Plus IPSec 3DES IOS feature sets to support IPSec.

Hope this helps.

[lkadlik]

Hi Jennifer,

This helps alot.

Thank you.

Lynne