11-23-2010 07:47 AM
hi
I have a cisco 891 behind a dsl gateway with out vpn. the cisco is connected to the local network on the GigabitEthernet0 interface.
the local lan is 172.16.8.0/23 (router on the GigabitEthernet0 ist 172.16.8.4) vpn clients get an address from the dhcp pool 192.168.17.100 - 192.168.17.200.
default gw is 172.16.8.1.
The vpn is working and the client gets the ip 192.168.17.X. I can connect to the cisco ip but to no other device on the 172.16.8.0/23 network. I guess there is a route missing or a loopback interface to make it work
thanks for any information....
manuel
11-23-2010 08:06 AM
Hi Manuel,
Normally what you need to check in the first place is that the local LAN 172.16.8.0/23 has a default gateway set to the router (or a route to send the traffic back to the VPN clients).
Also, the LAN should be included in the split-tunneling and exempt from NAT (if doing NAT on the router).
Also, no ACLs blocking the traffic.
Federico.
11-23-2010 08:10 AM
Sound like a NAT issue
Please share your config
Don't forget ti remove passwords and real IP's
11-23-2010 08:39 AM
11-23-2010 08:48 AM
In your config I see that only 1 interface is configured. Is this correct?
11-23-2010 10:32 AM
hi
yes, there is just ohne interface.
cheers Manuel
11-24-2010 12:07 AM
11-25-2010 05:26 AM
Hi Mike
is the setup with one interface not posible?
thanks for you answer.
Manuel
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide